12v 24V 3A CCM9 PWM Variable Dc geared reduction Motor Controller ESC For 3650

12v 24V 3A CCM9 PWM Variable Dc geared reduction Motor Controller ESC For 3650

Please Note:

• The motor is not allowed to exceed the limit load and stalled.
• The positive and negative poles of the circuit board power supply cannot be reversed, otherwise the chip will be burned.
• Reasonable selection of power supply according to the product input voltage (DC: DC 12V/24V).
• When approaching/exceeding the limit load torque, it may cause internal damage. Please use it reasonably
• Decreasing the motor speed will result in a decrease in output torque.
• There will be DB noise when the motor is running, and it will change slightly with the speed/load changeFunction: Forward and reverse, switching, stepless speed regulation, braking (requires the motor to have its own braking function).

Brushless Gear Motor Text Module Technical Wiring Diagram

• Use For 2418 / 2838 / 4260 / 3650 / 3525 / 2430 / 3-phase brushless motor series.
• Default position is 20khz, the 2 needle by the speed control knob is 2khz.

2418/2430 general wiring instructions:
Black wire: Negative pole of motor power supply
Red wire: Positive pole of motor power supply
Yellow wire: Speed signal output (18 pulses are output for one revolution of motor)
White wire: Motor stepless speed regulation port: Input PWM, the duty cycle is inversely proportional to the speed, connected to the power supply, connect negative pole is the highest speed.
Orange wire: Motor forward and reverse control: when the port is not connected, the motor is CCW, and the port is connected to low level (≤0.6V) motor CW

3525/3650 general wiring instructions:
Black wire: Negative pole of motor power supply
Red wire: Positive pole of motor power supply
Yellow wire: FG signal output (for external equipment to detect motor speed, three pairs pole magnetic ring motor turn a circle to output nine square wave pulses
White wire: Motor forward and reverse control: when the port is not connected, the motor is CCW, and the port is connected to low level (≤0.6V) motor CW
Blue wire: Speed regulation control: speed regulation by inputting analog voltage, the speed is proportional to the voltage

2838 general wiring instructions:
Black wire: Negative pole of motor power supply
Red wire: Positive pole of motor power supply
Yellow wire: FG signal output (for external equipment to detect motor speed, three pairs pole magnetic ring motor turn a circle to output nine square wave pulses
White wire: Motor forward and reverse control: when port is not connected, the motor is CCW, and the port is connected to low level (≤0.6V) motor CW
Bule wire: Speed regulation control: Reverse speed regulation through PWM mode; connect to the negative pole of the power supply at full speed (maximum speed)

4260 general wiring instructions:
Black wire: Negative pole of motor power supply
Red wire: Positive pole of motor power supply
Yellow wire: FG speed signal output (for external equipment to detect the motor speed, two pairs of pole magnetic ring motor turns a circle and outputs six square wave pulses)
White wire: Motor forward and reverse control: when the port is not connected, the motor is CCW, and the port is connected to low level (≤0.6V) motor CW
Blue wire: Speed regulation control: Speed regulation by inputting analog voltage (0-5V); Speed and voltage proportional.

BLDC High Power Motor Driver Module Dimension

Packing and Shipping:

Product Packaging:

• The DC motor will be packaged in a sturdy cardboard box.
• The box will be cushioned with bubble wrap to prevent any damage during shipping.
• The motor will be sealed in a plastic bag to protect it from moisture and dust.

Shipping:

• We offer free shipping within the continental United States.
• Shipping will be handled by a reliable courier service.
• Tracking information will be provided once the order is shipped.
• Delivery time may vary depending on the destination.

FAQ:

Q: What is the brand name of this DC motor?

A: The brand name of this DC motor is JNFUTEK.

Q: What is the model number of this DC motor?

A: The model number of this DC motor is JGB37-555.

Q: Does this DC motor have any certification?

A: Yes, this DC motor is certified with CE/ROHS.

Q: Where is this DC motor manufactured?

A: This DC motor is manufactured in China.

Q: What is the minimum order quantity for this DC motor?

A: The minimum order quantity for this DC motor is 100.

Q: What is the price of this DC motor?

A: The price of this DC motor is $9.85.

Q: What are the payment terms for this DC motor?

A: The payment terms for this DC motor are T/T.

Q: What is the supply ability for this DC motor?

A: The supply ability for this DC motor is 10000PCS per week.

Q: What is the delivery time for this DC motor?

A: The delivery time for this DC motor is within 10 days after receiving your deposit.

Q: What are the packaging details for this DC motor?

A: The packaging details for this DC motor are cartons and foam.